For Stihl, Honda Generators and Water Pumps. BCS Walk
Behind Tractors, give APD Power Center in Phoenix
Arizona a call Monday through Friday 7 am to 4 pm
Mountain Standard Time
(480) 838-7472  (800) 789-7894
If you have an garden that is odd shaped or is too small for a four
wheel tractor, this BCS 718 is a good choice for your smaller garden.

The BCS 718 walk behind tractor is very similar to the BCS 710
tractor, except the 718 has a Honda Engine. The attachment shown in
the picture is a 20 inch tiller. Other attachments include snow thrower,
seed planter, power broom, sickle mower, rotary mower and more.

One machine can power many different attachments. One of the big
advantages is you do not have to maintain four or five engines and
four or five pieces of equipment.

If you are in the Phoenix Arizona area, please stop by our show room
located at 412 W Gemini Drive in Tempe Arizona.

Attachments this garden tractor can power:
*18 or 20 inch tiller
*V Cultivator. This is a spring tine cultivator
*Vegetable seeder
*30 or 40 inch sickle mower
*21 inch brush mower (requires wheel upgrade to 5x10 inch)
*22 inch lawn mower (wheel upgrade to 5x10 inch is recommended)
*30 inch power sweeper. Rotary broom sweeper
*24 inch snow thrower
*2 inch water pump. Two Pentair models 50 or 85 psi
*Log splitter (requires power cradle and curved coupler)

*Honda GX200 196cc engine with 5.5 hp and 9.1 ft lbs of torque
*Two forward and two reverse gears 0.6 mph to 1.4 mph
*Transmission has a transport speed of 6.8 mph for ride on equipment
*Transport speed is only for rear mounted implements.
*All gear transmission. No belts to replace or chains to clean and oil
*All gears in the transmission are heat treated
*Embedded ball bearings for long life
*Handle bars reverse 180 degrees for either push or pull configuration
*Handle bars adjust up and down to accomodate operator height.
*This tractor
does not have a differential.
*Optional Ratcheting hubs simulate a differential for cornering.
*Weighs 213 pounds when equipped with an 18 inch tiller
*Weighs 235 pounds with the 20 inch tiller attached.
*Clutch is an automotive style dry double cone. Field replaceable.
BCS 718 with
20 inch Tiller